TC_Chu's Point

DE10-Lite Hello World

OS: Linux Ubuntu 20.10

Board : DE10-Lite

Quartus Prime Lite 20.x

Top.v -> Hello.v (Generate from Chisel)

Issues:

1.Setup USB Blaster in Linux

https://rocketboards.org/foswiki/Documentation/UsingUSBBlasterUnderLinux

2.Don't use Quartus's Project Wizard Board Selection. (De10-Lite Chip is wrong)

3.When thing goes wild, check the Pin file setting

4.Use the Pin file and sdc file from the De10-lite board CDROM (download from Terasic)

Nios2 on Step Max 10 with Master Read

Download StepNios.qar File

ToDo: Avalon-ST 

Nios2 on Step Max 10 with Master Write

Download StepNios.qar File

Start trying SystemVerilog. I like struct to abstract the net and remove wire/reg confusing.

By the way, I just learn verilog . Forgive me about the state machine style. 

PS.It seems the .qar file don't include software folder's nois2 c code. ... :( sorry. Fix next time.

 

Nios2 on Step Max 10 Taking Course of Altera about Custom Component

Quickest way to learn avalon bus system

 Altera QSYS Course about Custom Component

Nios2 on Step Max 10 wit DMA

Download project achieve  Download StepNios

Next : Dual Port Memory as Hardware Accelerator's Data Source

Nios2 on Step Max 10 with Serial Multiplier

Archived Project File ---> Download StepNios

Use Nios2 you can split the state machine into each "Register Write Cycle"

then you can single step each operation by "Write the Specific Register Address"

ToDo:Nios2 DMA and Avalon Bus ST Mode

Nios2 Running on Step Max 10 with Custom Component

I got 4 (32bit register) file as Avalon MM Slave.

Download StepNios 

The reason I start from Nios2 , is because I think got a Nios2 will make debug much easy.

Nios2 Running on Step Max 10

Finally get Nios 2 working on Step Max10 10M08SCM.

Attach Quartus Project Archive File. ---> Download StepNios

PS.Next step is to build my own Nios2 Peripheral 

Nios2 on Max10 use External UART

It works.